Well Shin Technology Co., Ltd.

Conductor Size mm²	Temperature ℃	Conductor No./mm	No. of Core	Insulation Thickness (mm)	Jacket Thickness (mm)	OD (±0.1mm)
0.75mm²		24/0.20	2C	0.6	0.8	7
1.0mm²		32/0.20	2C	0.6	0.8	7.2
1.5mm²		26/0.254	2C	0.7	0.8	8.2
2.5mm²		48/0.254	2C	0.8	1	10.1
4.0mm²		80/0.26	2C	0.8	1	11.1
0.75mm²		24/0.20	3G	0.6	0.8	7.4
1.0mm²		32/0.20	3G	0.6	0.8	7.6
1.5mm²		26/0.254	3G	0.7	0.9	8.9
2.5mm²		48/0.254	3G	0.8	1.1	10.9
4.0mm²		80/0.26	3G	0.8	1.1	12.1

 

Conductor Size mm²	Temperature ℃	Conductor No./mm	No. of Core	Insulation Thickness (mm)	Jacket Thickness (mm)	OD (±0.1mm)
0.75mm²		24/0.20	4G	0.6	0.8	8
1.0mm²		32/0.20	4G	0.6	0.9	8.5
1.5mm²		26/0.254	4G	0.7	1	10
2.5mm²		48/0.254	4G	0.8	1.1	11.9
4.0mm²		80/0.26	4G	0.8	1.1	13.2
0.75mm²		24/0.20	5G	0.6	0.9	8.9
1.0mm²		32/0.20	5G	0.6	0.9	9.2
1.5mm²		26/0.254	5G	0.7	1.1	11
2.5mm²		48/0.254	5G	0.8	1.2	13.2
4.0mm²		80/0.26	5G	0.8	1.3	14.5

 

Standard: AS 3191 2.10.10-PVC insulated and sheathed cords.
Rated voltage: 250/440V.
Maximum conductor operation temperature: 75℃ ,90℃ ,105℃ .
Conductor: Bare or tinned copper.
Insulation: PVC V-75,V-90 or V-105 .
Jacket material: (i)PVC 4V-75 for V-75, or(ii) 5V-90 for V-90 or V-105.
The minimum insulation thickness is calculated by the following formula:
T min.= Tnom.-10% Tnom. - 0.1mm
The minimum sheath thickness is calculated by the following formula:
T min.= Tnom.- 15% Tnom. - 0.1mm.+0.1mm) 。
The outer diameters are informative and not normative.
The construction is similar to that of H05VV-F.

Suitable for indoor small electrical instruments power supply wire.